Machine Shop Equipment List

Prototyping Mill: Tormach Personal CNC 1100

• Table size: 34 x 9.5 in
• Travel: 18 x 9.5 x 16.25 in (X,Y,Z)
• Power Requirements: 230-250 VAC, 50/60 Hz with 20A breaker recommended for primary phase, 115 VAC 50/60 Hz for secondary phase
• Maximum table weight: 500 lbs.
• Spindle Taper: R8
• Spindle Speed: 300 – 4450 RPM
• Transmission: V-belt drive, 2 ratios (Upper 750 – 4450 RPM, Lower 300 – 1750 RPM)
• Feed Rate: 110 ipm (X,Y) 90 ipm (Z)

Production Mill: Hurco VM1 Vertical Machining Center

• X travel: 26 inches (660 mm)
• Y travel: 14 inches (356 mm)
• Z travel: 18 inches (457 mm)
• Table size: 30 x 14 in (762 x 356 mm)
• Maximum weight on table: 750 lb (340 kg)
• Maximum spindle speed: 8,000 RPM
• Rapid Traverse X,Y / Z axis, ipm (M/min): 945 / 750 (24 / 19)
• Positioning: ±0.0002 in (0.005 mm)
• Repeatability: ±0.0001 in (0.0025 mm)

Production MIll: Hurco VM10i

• Travel:  26″ x 16″ x 20″
• Table Size:  30″ x 16″
• Spindle:  10,000 RPM, 54 ft/lbs @ 1,450
• Tool Capacity:  20 CAT40
• Machine Weight:  6,200 lbs
• Has a 4th axis

Techno Gantry Router LCX

• Foot Print: 109 x 149 in
• Travel: 59 x 120 x 5.0 in (X,Y,Z)
• Spindle Speed: 6000 – 18000 RPM
• Feed Rate: 200 ipm
• Software: Control Interface v1.423.8

HAAS TL2 Lathe

• CHUCK SIZE: A2-5 Nose 
• BAR CAPACITY: 2.3" 
• RPM : 1.8k
• POWER :
  • S.A.E: 10 hp
  • Metric: 7.5 Kw 
• Travels
  • X-Axis: 
    • S.A.E: 8 inch
    • Metric: 203mm
  • Z-Axis
    • S.A.E: 48 inch
    • Metric: 1219mm
• Feedrates
  • Rapids on X
    
    • S.A.E: 450 ipm
    • Metric: 11.4 m/min
  • Rapids on Z
    
    • S.A.E: 450 ipm
    • Metric: 11.4 m/min

Rabbit Laser Engraving/Cutting Machine RL-100-1290

• Laser type: sealed CO2 laser tube (lifespan approx. 8000 hours)
• Laser Power: 100 watts
• Power Source: 220 VAC
• Engraving Area: 1200 x 900 mm (47.2 x 35.4 in)
• Engraving Speed: 0 – 60,000 mm/min
• Max Cutting Speed: 0 – 36,000 mm/min
• Location Precision: <0.01 mm
• Laser Cut Diameter: 0.3 mm
• Graphic Formats Supported: BMP, PLT, DST, DXF, AI

Horizonal and vertical bandsaws

• Wilton Horizontal Band Saw Model 3410

  • 7" x 12" part area
  • 115V, 1 Ph
  • Cutting Capacity: Round (in.): 6
  • Rectangle (in/wide x high): 9-1/2 x 6
  • Flat Stock (in./wide x high): 11 x 1
  • Blade Size (in.): 3/4 x 0.032 x 93
  • Blade Wheel Speeds (SFPM): 86-132-178-260
  • Blade Wheels (in.): 11-7/16
  • Height of Work Table: 23-1/2
  • Motor: 3/4 HP, capacitor start, 1725 RPM
  • Overall Dimensions (in./LxWxH): 50x18x41

• Jet Vertical Band Saw Model J-8201K

  • 14 inch maximum wood and metal bandsaw
  • 115/230 V, 1 Ph
  • Vertical height limit: 6 inches
  • Seven speeds total
  • Blade speed (wood SFM): 3300
  • Blade speed (metal - SFM): 39, 57, 78, 107, 142, 196, 278

Table saws

• Table Saws: 10 inch Craftsman & 10 inch Bosch 4100

  • Both saws are 120V, 60 Hz, AC only 15A
  • Craftsman: 5000 RPM (no-load speed)
  • Bosch: 3650 (no-load speed)
  • Max cutting depth: 3 inches @ 90°; 2.5 inches @ 45°
  • Degree range: 0 (vertical) to 45°

• Bosch Circular Miter Saw Model 4212L

  • 120V, 15 A
  • 3,800 no-load RPM
  • 12 inch blade diameter
  • 3 HP max power