Skip to main content
Qualcomm Institute Prototyping Lab Prototyping
  1. Prototyping Lab
  2. Lab Capabilities
  3. Machine Shop Equipment List

Machine Shop Equipment List

Our dedicated machine shop (Atkinson Hall room 1208), allows us to mill and cut a wide variety of materials, from plastics to metals.

Hurco VM10i 3+1 Axis Milling Machine


  • Travel:  26″ x 16″ x 20″
  • Table Size:  30″ x 16″
  • Spindle:  10,000 RPM, 54 ft/lbs @ 1,450rpm
  • Tool Holder Style: CAT 40
  • Tool Changer Capacity:  Qty. 20
  • Removable Hurco H160 4th Axis

 

 

Techno Gantry Router LCX 59120


  • Foot Print: 109 x 149 in
  • Travel: 59 x 120 x 5.0 in (X,Y,Z)
  • Spindle Speed: 6000 – 18000 RPM
  • Maximum Feed Rate: 200 ipm
  • Software: Control Interface v1.423.8

 

 

 

HAAS TL2 Lathe


  • CHUCK SIZE: A2-5 Nose 
  • BAR CAPACITY: 2.3" 
  • RPM : 1.8k
  • POWER : 10 hp
  • Travels
    • X-Axis: S.A.E: 8 inch
    • Z-Axis: S.A.E: 48 inch
  • Feedrates
    • Rapids on X: 450 ipm
    • Rapids on Z: 450 ipm
  • 8" 3-Jaw Chuck
    • Two-Piece Jaws to enable hard, soft, or custom jaws
  • Steady Rest up to 5.5" OD
  • Tailstock

Rabbit Laser Engraving/Cutting Machine RL-100-1290


  • Laser type: sealed CO2 laser tube
  • Laser Power: 100 watts
  • Engraving Area: 1200 x 900 mm (47.2 x 35.4 in)
  • Engraving Speed: 0 – 60,000 mm/min
  • Max Cutting Speed: 0 – 36,000 mm/min
  • Location Precision: <0.01 mm
  • Laser Cut Diameter: 0.3 mm
  • Graphic Formats Supported: BMP, PLT, DST, DXF, AI

Saws

Horizonal and vertical bandsaws

  • Wilton Horizontal Band Saw Model 3410

    • 7" x 12" part area
    • 115V, 1 Ph
    • Cutting Capacity: Round (in.): 6
    • Rectangle (in/wide x high): 9-1/2 x 6
    • Flat Stock (in./wide x high): 11 x 1
    • Blade Size (in.): 3/4 x 0.032 x 93
    • Blade Wheel Speeds (SFPM): 86-132-178-260
    • Blade Wheels (in.): 11-7/16
    • Height of Work Table: 23-1/2
    • Motor: 3/4 HP, capacitor start, 1725 RPM
    • Overall Dimensions (in./LxWxH): 50x18x41

  • Jet Vertical Band Saw Model J-8201K

    • 14 inch maximum wood and metal bandsaw
    • 115/230 V, 1 Ph
    • Vertical height limit: 6 inches
    • Seven speeds total
    • Blade speed (wood SFM): 3300
    • Blade speed (metal - SFM): 39, 57, 78, 107, 142, 196, 278

 

Table saws

  • Table Saws: 10 inch Craftsman & 10 inch Bosch 4100

    • Both saws are 120V, 60 Hz, AC only 15A
    • Craftsman: 5000 RPM (no-load speed)
    • Bosch: 3650 (no-load speed)
    • Max cutting depth: 3 inches @ 90°; 2.5 inches @ 45°
    • Degree range: 0 (vertical) to 45°

  • Bosch Circular Miter Saw Model 4212L

    • 120V, 15 A
    • 3,800 no-load RPM
    • 12 inch blade diameter
    • 3 HP max power